Thursday 26 November 2015

@Alan @Simon WIM: Building Modelling (Help)



I'm modeling my first building, everything is looking okay but there are some things that are off and I need help with. The top of the large base of the building points out too much and is uneven, the circle dome doesn't indent inwards on the bottom, and the in the side view, the whole structure curves outwards slightly. Even with the tutorials I've followed, Maya is still quite a struggle for me. Any help would be appreciated.

3 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Hi Manisha

    It's a bit difficult to help you with your model via blogger...to help you can post a picture of your mesh (the wireframe) so we can see the geometry. However in your case (with the mix of problems / struggling) its better if you come in to Uni so we can sit with you and show you how / fix the problems.

    ReplyDelete
    Replies
    1. Hey Alan, thanks for the comment. Yes I think some one to one help is needed, I have asked Simon and things are improving a little, but still Maya is quite difficult for me.

      Delete